Antminer L3+ 504MH/S Scrypt Litecoin Miner LTC Dogecoin Mining Machine Ready to Ship Now


Category: Tag:


Brand: ABSKY


  • Compatible Coins – Any coin based on the Scrypt algorithm. There are many dozen coins, but the most well known is Litecoin and Dogecoin.
  • Built-in controller: No separate host computer required for operation.
  • Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
  • We will debug the machine before shipment to ensure normal operation. Hash rate fluctuate within 7% is Normal and acceptable.
  • Pay attention to dust and catkins, so as not to corrode the computing board or cause the heat of the mining machine to not be dissipated.

Details: Basic parameters: Device status:Like New. Good Quality Condition. Scrypt Mining Hash Rate: 504MH/s (±7% is expected). Compatible Coins: Litecoin and any other Scrypt-based coins. Power Consumption: 800W (±10%) at the wall. Noise level: Loud. Not for desk-top use. Sounds like a vacuum. Chip quantity per unit: 288 x BM1485. Rated Voltage: 11.60 ~13.00V. Operating Temperature: 0C to 40C. Notice: a. It is recommended that a single power supply is used for one machine, and the power consumption is recommended to be 800W or higher. In the case of non-independent power supply, the 4 hash boards can be connected to different power sources, but each hash board cannot be connected multiple power supplies, and ensure that the hash board is powered on last. b. L3+ has 9 PCI-E ports in total, one control board, two each of the four arithmetic boards, all of which need to be connected. c. Mining Machine Operating Environment: It is recommended that the ambient temperature is between 10 degrees and 30 degrees, and the ambient humidity is about 40%. Excessive humidity will cause short circuit or corrosion of the computing board due to dust accumulation, and severely cause the computing board to be scrapped and cannot be repaired.